There are some problems that we need to pay special attention to when customizing the CNC prototype. Today, let's share what problems we need to pay special attention to.

一。我們是明確我們要表面處理的方式，我們一般手板表面處理有磨砂，電鍍，氧化，等等這些處理方式，方式不同效果跟加工的費用和時間，他是不一樣的。所以說，我們要提前確定好自己需要的是什么樣的一個加工方式

One. We are clear about the surface treatment methods we want. We generally have frosting, electroplating, oxidation, etc. these treatment methods have different effects, and they are different from the processing cost and time. Therefore, we should determine what kind of processing method we need in advance

二、我們要確定手板的性能，我們是需要什么樣的？產品是需要耐高溫的，耐磨比較強的，或者是比較韌性的，或者是需要整體加工的。這些都跟我們需要的材質有關系，如果我們要做耐高溫的時候，建議還是使用pps材質會比較好，他可以耐高溫到300度。如果是想做透明的，就用那個亞克力材料會比較好，但是如果我們要做拆件的大件產品的話，用abs材料是一個很不錯的選擇因?yàn)樗恼承员容^強，然后拆拆出來，然后強度的對他的強度影響比較小。

2、 We need to determine the performance of the hand board. What do we need? Products need high temperature resistance, strong wear resistance, or toughness, or need overall processing. These are related to the materials we need. If we want to make high temperature resistance, it is better to use PPS material. It can withstand high temperature to 300 degrees. If you want to be transparent, it would be better to use the acrylic material, but if we want to make large products with disassembled parts, ABS material is a good choice, because it has strong viscosity, and then it is disassembled, and then the strength has little impact on its strength.

三、當然就是費用的一個提前的預算。因?yàn)槲覀冞M(jìn)行小批量的手板加工，他需要投入相對應的費用。所以說整體上面我們費用的計算也是很關鍵的，以免因?yàn)轭A(yù)算不足延誤了新品研發。所以說，我們要先確定好自己的需求，跟預算。然后根據根據自己的實際情況來尋找對應的手板廠家。以上就是CNC手板定制的時候，我們需要一些需要注意的一些細節。

3、 Of course, it is an advance budget of expenses. Because we carry out small batch hand board processing, he needs to invest the corresponding cost. Therefore, on the whole, our cost calculation is also very key to avoid delaying the development of new products due to insufficient budget. Therefore, we should first determine our own needs and follow the budget. Then according to their actual situation to find the corresponding hand board manufacturers. The above are some details that we need to pay attention to when customizing CNC hand board.