在手板模型加工過程中咱們會盡量避免有失誤的情況出現，但是在定制加工工作當中，想要不犯錯幾率很小。那么北京手板模型加工出錯之后如何補救？

In the process of prototype processing, we will try our best to avoid mistakes, but in the process of customization processing, the probability of not making mistakes is very small. How to remedy the mistakes in Beijing prototype processing?

1、一些手板模型出現較大的失誤就不可補救了，只能報廢，像透明件PMMA，PC等，因為透明工件是不許有粘接痕跡的。

1. Some prototype models cannot be remedied if there are big mistakes, and they can only be scrapped, such as transparent parts PMMA, PC, etc., because transparent parts are not allowed to have bonding traces.

2、一些工件是可以進行補救的，工件為非透明件，像ABS，POM，PA等，一般都是針對塑膠件進行補救。補救的方法一般可用補救材料填在過切或錯切的地方，常用的補救材料是502膠水混合痱子粉或原子灰。取適量痱子粉加入502膠水調成稀糊狀即可成為502膠水混合痱子粉，將調好的材料填入過切的地方待干后再補加工一下即可。

2. Some workpieces can be remedied. The workpieces are non transparent, such as ABS, POM, PA, etc. They are generally remedied for plastic parts. Remedial materials can be used to fill in the place of over cutting or wrong cutting. The commonly used remedy materials are 502 glue mixed with prickly heat powder or putty. Take a proper amount of prickly heat powder and add 502 glue to make it into a thin paste, which can be made into 502 glue mixed prickly heat powder. Fill the prepared materials in the cut area to be dried and then re processed.

要注意：

Note:

對生產程序進行規劃，提高材料使用率的同時提高工作效率。我們在北京手板模型加工之前，一定要了解加工內容，根據加工的內容合理的安排安裝基面、加工基面，這樣就能實現對原材料進行一個合理的采購，提高材料的利用率，減少浪費的同時也提高了手板加工的效率。

Plan production procedures to improve material utilization and work efficiency. Before processing the prototype in Beijing, we must understand the processing content, reasonably arrange the installation base plane and processing base plane according to the processing content, so that we can achieve a reasonable purchase of raw materials, improve the utilization rate of materials, reduce waste and improve the efficiency of prototype processing.

注意在多次成型過程中產生的熱變形在制作復雜零件的時候，雖然要經過多次的成型的技術，但是為了獲得精美的零件的話，我們一定要注意在加工的過程中由于熱產生的變形，我們一定要在制作安裝的過程中小心零件的尺寸。

Pay attention to the thermal deformation generated in the process of multiple molding. Although it is necessary to go through multiple molding technologies when making complex parts, we must pay attention to the thermal deformation generated in the process of processing in order to obtain beautiful parts. We must be careful about the size of parts during the process of manufacturing and installation.

手板加工過程中因為材料性能很脆易裂，又不能有粘接痕跡，在加工過程中要特別注意，在加工手板模型的時候一定是需要非常的謹慎、專注的。更多相關的信息就來我們網站http://www.faxuemingjia.com進行咨詢吧！

Due to the brittle material properties and no bonding traces, special attention should be paid during the processing of the prototype. It must be very careful and focused when processing the prototype. For more information, please come to our website http://www.faxuemingjia.com Consult!