你知道手板模型與模具的區別在哪里呢？為了更好的選擇且后期的使用能夠順利進行下午，濟南手板廠家為您解析下這個問題。

Do you know the difference between prototype and mold? In order to make a better choice and use it smoothly in the afternoon, the Jinan prototype manufacturer will analyze this problem for you.

模具，工業出產產品所需的各種模子和東西。淺顯的講就是用來制作成型物品的東西，這種東西由各種零件構成，在外力作用下使坯料成為有特定形狀和尺寸的制件的東西。不同的模具由不同的零件構成。它首要通過所成型資料物理狀態的改變來完成物品外形的加工。素有“工業之母”的稱謂。任何商品都是用模具制作出來的，可以說沒有模具就沒有產品的出產，廣泛用各個工作產品的成形加工中.

Moulds, all kinds of molds and things required by industrial products. In simple terms, it is used to make molded articles, which are composed of various parts. Under the action of external force, the blank can be made into a workpiece with a specific shape and size. Different moulds are composed of different parts. It mainly completes the processing of the article shape by changing the physical state of the formed data. It is known as "the mother of industry". Any commodity is made with molds. It can be said that without molds, there will be no production of products. It is widely used in the forming and processing of various work products

實體模具制作的本錢一般都是很高，大型的模具一套都是十幾萬幾十萬萬乃幾百萬，尤其是醫療工作，上百萬的模具很常見。如果在裝置模具的過程中呈現結構的不合理或許其他的問題，這樣丟掉就很大了。所以一般先用手板供認外觀、結構和功能，供認沒有什么問題后再開模批量出產。

The cost of making solid molds is usually very high. A set of large molds is tens of thousands, hundreds of thousands or even millions. Especially for medical work, millions of molds are very common. If there are unreasonable structures or other problems in the process of mold installation, it will be a big loss. Therefore, the appearance, structure and function are generally acknowledged by hand, and the mold is opened for batch production after there is no problem.

手板，也可以稱為樣品、樣件、樣板，有些當?shù)赜职阉凶?ldquo;首板”，即產品的頭個樣板，在日本，又叫做“手辦”，英文翻譯是“rapidprototype”。手板是驗證產品可行性的開始步，是找出規劃產品的缺點、缺少、弊端直接且有效的方法，然后對缺點進行針對性的改善，直不能從個別手板模型中找出缺少，一般還需要進行小批量的試產然后找出批量里的缺少加以改善。

Prototype can also be called sample, sample and sample. Some local people call it "first board", that is, the first sample of the product. In Japan, it is also called "handmade". The English translation is "rapid prototype". Prototype is the first step to verify the feasibility of products. It is a direct and effective method to find out the shortcomings, deficiencies, and shortcomings of planned products, and then make targeted improvements to the shortcomings, until the deficiencies cannot be found from individual prototype models. Generally, small batch trial production is required, and then the deficiencies in the batch are found and improved.

一般一個產品剛研發或規劃完成的產品均需要做手板模型，規劃完成的產品一般不能做到很好，乃無法使用，直接出產一旦有缺點將悉數作廢，大大糟蹋人力和物力和時刻。而手板一般狀況是少數的樣品，制作周期短，損耗人力物力少，很快地找出產品規劃的缺少然后改善，為產品定型量產供給充足的根據。

Generally, a product that has just been developed or planned needs to be modeled. The planned product is generally not good enough, or even cannot be used. Once there are shortcomings in direct production, all products will be discarded, which will greatly waste human, material and time. In general, the prototype is a small number of samples, with short production cycle and less manpower and material resources. We can quickly find out the lack of product planning and improve it, so as to provide sufficient basis for product finalization and mass production.

手板模型與模具的區別在哪里呢？對于這個問題，我們以上就講解出來內容了，您對此有什么疑惑隨時來我們網站http://www.faxuemingjia.com咨詢吧！

What is the difference between prototype and mold? For this problem, we have explained the content above. If you have any questions, please come to our website at any time http://www.faxuemingjia.com Consult!